zaterdag 19 juni 2010

TerraCycle fabrikant reageert

In de vorige post meldde ik de problemen met de TerraCycle kettingtandwielen. Arnold Ligtvoet heeft contact met de fabrikant.

Arnold schrijft:
naar aanleiding van het lawaai van de Terracycles denk ik dat je vandaag of morgen een mail krijgt van Pat Franz. Hij is de eigenaar van Terracycle en wil graag kijken of jouw probleem opgelost kan worden.

Hij kwam al via mail met de tip: "Also, I noticed that the idler in Wim's photo is a 13z. The 14z fits in the Quest perfectly. A 14z Sport would be a very good idler for a Quest since they are less expensive and are not visible in the bottom of a Velomobil.

The inside width on an Elite idler is 10mm. The inside width on a Sport idler is 10,5mm, so the Sport is a little bit bigger inside. Also, if the chain rubs on the inside of a Sport idler, there will be less sound and it will not be visible. So, for applications where the idler cannot float, and the chain must come in from the side, a Sport idler might be a better choice."

NB. De foto toont de Sportversie van het kettingtandwiel. Met een soort nylon flenzen zal deze duidelijk minder lawaai maken als de ketting niet zuiver in lijn ligt.